Gravel bonding/binding resins

Gravel bonding/binding resins

Gravel bonding/binding resins

G-FIX RESIN SYSTEM FOR AGGREGATE BINDING, sometimes referred as resin bonded or resin bound.
Suitable for laying over concrete and macadam bases that are dry, clean and dust free. A primer/sealer coat on concrete and tarmac is strongly recommended.
Our Gfix gold and UV stable resin kits will generally bond approx 75kgs of aggregate giving a typical coverage of approx 3m² at 15mm deep or 2.5m² at 18mm depth.
Our G-fix epoxy 3kg kit will typically bond 50kgs of aggregate coverage approx 2m² at 15mm or 1.6m² at 18mm.

Scattercoat system is primarily a resin spread at approx 2mm depth then small dry aggregate is scattered liberaly over the wet resin, allowed to cure then excess is brushed up. See kit sizes discription for coverage.


Display per page
Sort by

Gravel Bonded aggregate trial kit 1m non UV system (will tend to darken via uv therefore light or white aggregates are not recommended)
 

£39.60 / Kit(s)

Gravel Bonded aggregate trial kit 3sq m at 15mm deep non UV system (will tend to darken via uv therefore light or white aggregates are not recommended)
 

£86.40 / Kit(s)

Gravel Bonded aggregate trial kit 1m UV Stable system 

£45.60 / Kit(s)

Gravel Bonded aggregate trial kit 3m x 15mm deep UV Stable system 

£99.60 / Kit(s)

Scattercoat 2sq metre kit, contains materials to cover a 2 square metre area..

£39.60 / Kit(s)
Product data sheet

Scattercoat 4sq metre kit, contains materials to cover a 4 square metre area..

£72.43 / Kit(s)
Product data sheet

PU Scattercoat resin.
Can be applied in lower temperatures down to approx 5ºC

A resin system designed for application over new or sound existing concrete of tarmac bases, followed by full coverage of dried aggregate which is allowed to cure prior to sweeping away the excess leaving a very pleasing anti-slip hardwearing surface.
Very popular in high spec areas of shopping arcades park footways along with domestic areas.
Coverage is approx 10-12M²

Gfix primer is recommended on both Tarmac & concrete surfaces.

£114.00 / Kit(s)
Product data sheet

G-fix UV is a flexible two part solvent free UV stable polyurethane resin, suitable for binding white and very light coloured aggregates where no colour change is preferred,
producing a decorative porous hard wearing attractive surface on driveways, roads, footpaths, cycleways, balconies, roof terraces, playgrounds, pool surrounds etc.

G-fix UV can be applied in cooler application temperatures 5ºC, accelerator is available to speed up cure during cooler working conditions.

Available from £54.00 / Kit(s)
Product data sheet

Probably the trades most popular, G-fix Gold is a flexible two part solvent free polyurethane resin, used to bond aggregates,
producing a decorative porous hard wearing attractive surface on driveways, roads, footpaths,
cycleways, balconies, roof terraces, playgrounds, pool surrounds etc.

G-fix Gold is the preferred system in cooler application temperatures, can be applied at 5ºC, accelerator is available to speed up cure during lower working temeratures.

This resin will darken over time, not recommended for white or very light coloured aggregates.


 

G-FIX Gravel bonding resin Used to bond aggregates gravel etc on drives and footpaths.

Recommended for minimum application temperatures of 10ºC+

G-FIX Trade size, Gravel bonding resin Used to bond aggregates gravel etc on drives and footpaths.

£648.00

Scattercoat resin10kg kit is enough to cover approx 5m² area.

G-FIX/SC Primer
£15.28

PU G-fix gold/scattercoat/UV clear accelerator.

Speed up the cure time during normal and lower operating temperatures, supplied with measuring syringe for accurate dosing.

£12.00 / Kit(s)

Serrated Squeegee 6mm V notched 560mm wide.

£35.82 / unit(s)

Replacement 6mm V notched PU squeegee blade 560mm

£15.00 / unit(s)

New (Size: 600mm)

KAM's adjustable Levelers spread flooring overlay compounds including resin bonded aggregate up to 15mm depth in one easy application. If deeper depths are required then our Floor Spreader 800 is recommended. They are available in widths of 450mm & 600mm and are simple to adjust.

Our round pin model is made from 1.6mm Stainless Steel with an aluminium pin plate holder incorporating five steel pins. It is easily adjusted from 0mm to 15mm for speedy set up.

£61.44

New (Size: 450mm)

KAM's adjustable Levelers spread flooring overlay compounds including resin bonded aggregate up to 15mm depth in one easy application. If deeper depths are required then our Floor Spreader 800 is recommended. They are available in widths of 450mm & 600mm and are simple to adjust.

Our round pin model is made from 1.6mm Stainless Steel with an aluminium pin plate holder incorporating five steel pins. It is easily adjusted from 0mm to 15mm for speedy set up.

£57.12 / Kit(s)

KAM Rakes are for spreading new floor coatings to a desired thickness. Used to spread scattercoat resins to an even coverage prior to aggregate casting. A general rule is that the teeth of rakes will spread material to 40% of tooth depth based on the material used (i.e. 5mm tooth achieves 2mm)

£46.80

The KAM FS80080 Floor spreader is an adjustable heavy-duty spreader for application of flowable flooring overlay materials applied in excess of 6mm thick.
Including resin bound gravels or rubber crumb, easily spread to depths up to approx 50mm prior to trowelling.

The 800mm long stainless steel leveling blade is fixed to an aluminum frame. Hardwearing steel skis at each end provide adjustment from 0mm to 50mm.

£70.80

Spiked over Shoes:

Our spiked shoes are available with 25mm or 40mm long steel spikes and re used to gain safe access onto new flooring overlay systems.
Designed to be worn whilst working on fresh epoxy floor coatings and whilst deaerating the fresh surface, great for using alongside the Bubbblebuster® Spiked Roller.
One size fits under most sizes of site shoe or boot with straps to secure to the users footwear.

Available from £18.00