Gravel bonded UV trial kit 3m


New

Gravel bonded UV trial kit 3m

£99.60 / Kit(s)


3m x 15mm kit
A good sound base is the key to longevity in all resin bound systems, the area must be clean dry and free of all loose material dust etc, any cracks or faults must be repaired prior to appliaction of any of the resin systems (ask for advise if not sure), apply the sealer primer allow approx 20 mins to tack off, the area is then ready for the application of the resin bound matrix, if using a mixer then the resin and hardener components are thoroughly blended together in the resin bucket, the aggregate is poured from the bags into the mixer, the blended resin is then poured over the dried aggregate tumbling the contents until an even layer of resin coats each granual of aggregate, this is then applied to the primed area and troweled flat at 15mm depth, if a mixer is not available then remember to split the resin hardener mix into 3 even amounts and process one 25kg of aggregate in the supplied container at a time, repeat for other two bags of aggregate, remember the resin when mixed together will have a pot life therefore do not delay in the tumbling or drill and mixing paddle operation.. leave for 12 hours before walking onto the surface, allow approx 7 days for the material to achieve full hardening properties before heavy traffic.

Browse these categories as well: Promotional products, Speciality resins, Gravel bonding/binding resins