Rubber crumb binder 25kg

£135.00 / unit(s)

Rubber crumb binder (One-component Single pack)  25kg.

Shock Pad Base Layer / Top Coats
Mix rubber granules and binder at desired ratio.
Typical addition of 12% for the Base layer and 18% for the Topcoat (wear) surface.

Ensure the volumetric ratio of binder addition is considered as the bulk density of rubbers will vary. Rubber granules should be dry in order to stop accelerated cure times and foaming of the binder.
For adequate mixing, a high torque rotary mixer should be used. Rubber and binder should be mixed for upto 5 minutes ensuring all the rubber is coated.
The product can then be laid out on a prepared surface and compacted using a hand trowel or weighted roller. Ensure an even compaction of the rubber. A release agent should be used on all tools to avoid adhesion of the binder to the tools.

Ensure all equipment is cleaned well after use.
In some cases, particularly low temperatures, Rubber Crumb Binder (PU Accelerator) may
need to be added.


Product Note Status Price
Rubber crumb accelerator Rubber crumb accelerator
£12.00 / Kit(s)
Rubber crumb top wear layer(EPDM) Rubber crumb top wear layer(EPDM)
Available from £21.60 / unit(s)
Base rubber crumb 25kg Base rubber crumb 25kg
£12.00 / Kit(s)
Display accessory details

We also recommend

Customers who bought this product also bought

Mixing bucket
Available from £0.60
Rubber crumb top wear layer(EPDM)
Available from £21.60 / unit(s)
Standard thinners
Available from £7.20
mix/measuring pot
Available from £0.60
Mould release agent
Available from £3.60

Browse this category: Rubber binding resins