Base rubber crumb 25kg
Product no.: RC base-25
Description
Base Rubber crumb.
Shock Pad Base Layer / Top Coats
Mix rubber granules and binder at desired ratio.
Typical addition of 12% for the Base layer.
Base Rubber crumb.
Shock Pad Base Layer
Mix rubber granules and binder at desired ratio.
Typical addition of 12% for the Base layer.
Ensure the volumetric ratio of binder
addition is considered as the bulk density of rubbers will vary. Rubber granules should be dry in order
to stop accelerated cure times and foaming of the binder.
For adequate mixing, a high torque rotary mixer should be used. Rubber and binder should be mixed
for upto 5 minutes ensuring all the rubber is coated.
The product can then be laid out on a prepared surface and compacted using a hand trowel or
weighted roller. Ensure an even compaction of the rubber. A release agent should be used on all tools
to avoid adhesion of the binder to the tools. Ensure all equipment is cleaned well after use.
In some cases, particularly low temperatures, Rubber Crumb Binder Accelerator (1k) may
need to be added.
MDI polyurethanes are subject to colour changes during exposure to ultra violet light. This will not
affect the mechanical properties of the binder.